The Camfil Farr Type 8 holding frame has a variety of fasteners that allow the installation of various combinations of ASHRAE prefiltration and final filtration.

The installation may include any combinations of the following: 1", 2" or 4" deep pleated or panel filter. Any 6" or 12" deep rigid filter and headered style rigid or pocket filters.

The Camfil Farr Glide/Pack® has set the standard for side-access housing integrity for over 20 years. The integral universal final filter holding frame virtually treats all of the air seen by the filter.

Less than 1/2 of 1% air bypass/leakage guaranteed. For those concerned about air quality and a housing that assures system contaminant removal standards by which other HVAC components are judged.

The Camfil Farr Glide/Pack® has set the standard for side-access housing integrity for over 20 years. The integral universal final filter holding frame virtually treats all of the air seen by the filter.

Less than 1/2 of 1% air bypass/leakage guaranteed. For those concerned about air quality and a housing that assures system contaminant removal standards by which other HVAC components are judged.

.

The Camfil Farr 5P Glide/Pack® is a dual-stage filter housing designed to hold a 2" ASHRAE grade prefilter with a 4" or 6" deep high-efficiency ASHRAE grade final filter.

Convenient factory assembled side-access dual-stage housing for minimum depth HVAC applications. Ideal for medical, commercial or industrial facilities. Ideal for today's mini-pleat final filter technologies or for systems with reduced velocities.

The Camfil Farr 6P Glide/Pack ®is capable of multi-stage application of gaseous and particulate air filters in a compact 40" deep housing. The industry's only pre-manufactured 3 or 4 stage side-access filter housing.

Versatile in accommodating numerous combinations of filters for the removal of particulate or gaseous contaminants. An excellent choice in applications where the future may dictate increased levels of particulate or gaseous filter efficiencies.

The Camfil Farr Diffuser/Pack® is an inline housing that removes turbulence from forced airflows and uniformly distributes the air throughout the full breadth of the air distribution system. The Diffuser/Pack is an excellent choice for those applications where component space may have been limited and where the basics of good airflow design may have been compromised.

Designed primarily for the positive side of the fan, the Camfil Farr Diffuser/Pack is installed in the same fashion as the filter housing. At 500 feet per minute face velocity the equivalent re-directional reaction is the equivalent of three duct lengths from an abrupt airflow turn.

The Camfil Farr Moisture/Pack is an inline housing that will remove mists, moisture oil or water from the airstream to protect downstream components from associated maladies.